zm400 cannot use com1 Use a null modem serial cable . Match computer com1 serial port settings with printer serial port settings.
Question about Zebra Z Office Equipment & Supplies
zm400 media darkness settings get reset after printings lable from SAP The printer driver settings override the printer settings unless you tell the driver to use the printer settings. You can tell by
Question about Zebra Z Office Equipment & Supplies
...ZM400? Please help. I need appropriate printer setting. you should recalibt=rate the printer. Are you sure that your previous label was not longer? With the autocalibrate function activated the ...
Question about Zebra Z Office Equipment & Supplies
...ZM400 is to set the power on setting in the LCD menu to calibrate and the head close setting to feed, save these settings in memory and then reboot the printer. This way, you will only need to reboot ...
Question about Zebra Z Office Equipment & Supplies
...and are not contained in the label boundries. Help Firstly make sure your using the correct drive ZM400 rather than Z4M. if you are using the applications driver make sure of headers and footers ...
Question about Zebra Z Office Equipment & Supplies
Trying to print different size labels but it will only work if I calibrate each time I load a new one. Is there anyway to do this? I am printing a barcode lable 2 across and a small label 3 across ...
...keep saying"error condition my printer keep saying"error condition ribbon out" on my ZM400. There is lots of ribbon, head is clean lots of media. printed many labels before. now this
zebra zm400 turn printed info 180 degrees when the zebra zm400 prints the information on labels, the printed info is facing the printer. Are there printer settings that would rotate the info 180 ...
...in ZM400 printer it was showing Error condition ribbon out in that printer screen In the printer setting- Change the Print Method from - "Tharmal Transfer to Direct Thermal" and save it ...
our zebra zm400 is set to ****-off and everything seems fone for a while, then the backing take up roll (rewind) stops rewinding and the backing starts to hang down the front. Go into the setup menu ...
285 questions posted
Usually answered in minutes!
211 Questions
32 Questions
32 Questions
11 Questions
6 Questions