Samsung SMT-190 19" Flat Panel TFT LCD Security Monitor "monitor shows picture goes" Questions

monitor show a picture for about 3 seconds and the n goes blank Try a 2nd monitor on the cpu and see if the same thing happens. If the same thing happens then the video card is bad on the computer. If

monitor off and on again and pictures shows for a second and goes blank...samsung syncmaster 204BW Most common failure in the LCD monitors are bad capacitors (bulging top/seal or leaking) in the power

MONITOR POWER ON AND PICTURE SHOWS FOR HALF A SECOND THEN GOES BLANK, POWER OFF AND POWER ON PICTURE FOR HALF A SECOND AND GOES BLANK More likely to have problem in either the backlight light inverter

...shows that the picture board of your monitor has developed fault. The best thing for you to do now is to take the monitor to a local repairer within your vicinity or any service center to help with ...

...monitor shows a box with these things written on it------ NOT OPTIMUM MODE, RECOMMENDED MODE 1024*768 60 Hz ? I have checked my settings and they are set to the same resolution and refresh rate. What ...

monitor turns on, shows a picture for about 15 seconds and then goes black. No picture. What happened and what do I do to correct it? I was trying to change the resolution on my monitor and accidently

still has power. If you shut off, wait, and then turn back on it might show picture for a minute but then goes black again. It ia a problem with monitor. So pls you can repaired it from service center

...MONITOR ON FULL PICTURE AND SUDDENLY YOU SEE A 3 INCH RED AND BLUE SQUARE SITTING PERFECTLY IN THE CENTER OF THE SCREEN,ALONG WITH THE PICTURE, STILL SHOWING, WITH THE WORDS IN THE SQUARE --- CONTROL ...

...shows that the picture board of your monitor has developed fault. The best thing for you to do now is to take the monitor to a local repairer within your vicinity to help with the replacement of the ...

...monitor shows the picture for a second norcent LM730 lcd monitor shows the picture for a second then goes blank check your vga data cable. if you have another lcd just swap with the system and check ...