RCA HD52W59 HDTV Projection Television "rapid heat" Questions

...rapid flicker to the image after replacing bulb. How to resolve this issue. Possible, there is a faltering connection of a solder ring by heat-component fitting and caused to print or in the vicinity ...

JVC HD DILA 56G886. replaced lamp and now it shuts down after 10 I just replaced the lamp for my JVC HD 56G886. It now shuts down after about 10 minutes. The screen goes black and the power button ...

...rapid succesion.. Someone said it sounds like the bulb or ballast.. If so, how do I determine which & is their any instructions on replacing the ballast.. I watched a service man replace the engine ...

...after a few seconds the blue power light goes out and the red lamp/program light begins to blink rapidly. I have checked the lamp and it is good. I have a feeling it is in the power supply board ...

...but the same thing happens. TO make things worse, it now turns of and the standby light flashes rapidly and i have to unplug the power and plug it back in just to try and turn it on again. then ...

...it in, I pressed power and the green power light on the front of the TV just blinks for 9 times rapidly, pauses for a second, and repeats (other times it blinks slowly). This happened to me in ...

Picture goes in and out When the set is turned on the picture goes in and out rapidly almost like eyes blinking. The picture quality is fine. Hello, This will require you opening the back cover of the

...Tv does turn off and on with both front panel and remote power buttons. The power button flickers rapidly with any button press on the remote control. Reading of flyback transformer failures here,

...so they can be substituted (never sub a lower-power version for what is in your set - it will die rapidly and possibly with destructive fireworks). If you don't understand the datasheet for the ...

My JVC HD56G786 rear projection tv is not powering on anymore. I have recently replaced the bulb (as I've done once in the past) and it worked fine for about 4 weeks. This weekend it began powering ...