Maytag MER6872 Gemini Electric Kitchen Range "oven heat even replacing heating" Questions

...oven doesn't heat evenly The oven in our Jenn-Air oven (model JGW9130) isn't heating evenly. A pie came out brown on top but raw in the middle. The same for other foods. Try adjusting the rack in the ...

...oven, gas no heat I have the whirlpool gas built-in wall oven and I get no heat out of it. I have a light that showed up before and it had some heat but not even close to the right heat came out. Now ...

oven continues to heat and heat. Even if I turn the oven off. To stop this when it occurs, i must shut off the gas to the oven. This obviously makes the oven not usable. I have changed the thermostat,

...and is going bad.... have the repair man replace the ignitor, or DIY.... Check out this tip about your problem... Oven not Working or Oven not Heating Oven Problems Replacing the Igniter ...

...oven is not stopping the heat at the appropriate temp. What can I do about this - and if I need to look at something in the oven please tell me where. I am not fluent in oven lingo. Thank you! ...

...Only the bottom oven heats, the bottom oven is off. I have replaced the oven control (and yes it is expensive) and the top oven continues to heat continuously. What's next? These parts are

oven is taking too long to heat or just not heating up right,then check out this tip that will give more detail about your problem. Oven Problems Electric Oven is Heating Slowly or Poorly heatman101 ;

...oven does not heat This PGR 30 oven does not heat. The stove top and broiler work. It is gas over gas. Recently, this oven heated slowly and sporadically, and now does not even get warm. I purchased ...

...oven to heat up too much, which in turn could be causing the range top to get excessively hot. You may need to have the thermostat checked and possibly replaced. 3. Dirty or damaged oven seals: The ...

...oven is not heating up past 150 degrees. The bottom heating element doesn't seem to be working - it doesn't turn red or even get hot to the touch at 425. The element will have to be replaced if there ...