Maytag PYE2300AY Electric Dryer "neptune quit working" Questions

My dryer quit working and I think it is the thermal fuse. how do I remove the back of dryer to change the fuse? maytag neptune?..remove door and screws on other side too.. pop off front. :)

neptune dryer was tripping the circuit breaker. Then it just lost power and quit. What could cause this and how do I fix it. This could be a bad breaker or a loose connection in the dryer plug/outlet.

Neptune Dryer humming but not running My dryer has had a problem of periodically humming when the start button is pressed. Yesterday, the dryer quit working all together. The only thing it will do is

...Neptune dryer suddenly quit working. The light comes on inside, but it won't start. This could be several easy fixes. Check to see if the door switch is working if it is not clicking when pushed this ...

Neptune dryer 5500 no power Was drying clothes and it shut off... No power, no light. I check the house fuse and it works fine. Any suggestions? This dryer has 2 thermal fuses. One next to the control

neptune dryer quit heating, after my wife changed the temp setting on the console from regular, to extra low drying temperature. The heating element reads 10.5 ohms. The thermal cutoff reads 0.02 ohms

...neptune with dryer top. It quit heating so I reset it to factory defaults using the technical manual and the heat came back on but only for one cycle, Top heat works fine. Bottom control panel has ...

Neptune Dryer that I purchased in 2005 that just quit. I unplugged it and plugged it back up once and about 15 minutes later the lights on the control panel came back on and the dryer worked for about

maytag neptune gas dryer wont heat after reconnecting gas line after move the dryer quit heating and was working perfectly just before. ThermoStat

dryer displays 8.8 when you push start 8.8 is for a faulty control board .The control board is located behind the display in the upper unit. Access to the board is from the back side and is quite easy