upper side of drum unit, near the handle, you shuld see the little cork.Pull out the cork, and with vacume cleaner, vacume the waste toner out. THIS SHOULD SOLVE YOUR PROBLEM, BUT THE BEST SOLUTION IS
Question about Canon Office Equipment & Supplies
...dust inside the copier from when the old cartridge was removed and reinserted. First you need to vacume the spilled toner, especially on transfer roller, eaven clean the transfer roller contacts. ...
Question about Canon Office Equipment & Supplies
I'am getting black streaks on the side of paper. Cleaned the primary wires and vacumed the transfer and image drum. Did you cleaned the fixing roller or optics or glass for adf or platen. Check the ...
...jams. A stuck registration solinoide can also cause jams such as these. On this machine there is a vacume fan at the lower back, if it sticks or turns slow, it can create many frustrating jams, even ...
Question about Ricoh Office Equipment & Supplies
...is coming what can i do plz give some idea Hello, firstly you need to remove the developer and vacume the developer unit and magnetic developer roller. Put in new developer and correct toner in ...
...740. I am getting an error message 33. I have replaced twice the transfer roller (new), cleaned and vacumed the the interior of the paper feed unit. I have replaced the second bias clutch and cleaned ...
...the print is not looking good. pl mail me the solution 1) Do you use not genuine toner? If it is so vacume the toner out, and replace it with genuine. 2) Check the transfer roller- clean contacts 3) ...
and Paper jam You just insert pages into the printer properly and print them. Or Clean your roller By Vacum Cleaner if you have. Or Uninstall the driver and re-install your driver again and restart PC
...it comes through the rollers before coming out of the machine, any suggestions? hi, if you have vacume cleaner then clean your printer first. and remove roller and clean also gently. After that ...
Question about Sharp Office Equipment & Supplies
...But if the toner is like printed, change blade and drum. If the toner is like spiled on copy, vacume and clean the ...
210 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions