...put the wash in as usual, door locks, water starts to come in but then it stops. A code which I think is Lr appears, and it won't restart. The LR error on your non-spinning Maytag Neptune is usually, ...
Question about Maytag Neptune Washing Machines
...looking box at the top front right hand corner. Find connector M13, (has red marking on it and only 3 wires) disconnect it by pushing the retainer tab back and pulling gently on the connector. Spray ...
...message and will not rinse and drain. F28 is a serial bus error from the CCU (Central Control Unit) to the MCU (Motor Control Unit). All you need is some Electronics contact cleaner spray and a 1/4 ...
Question about Magic Chef Washing Machines
...there Had E2 message on mine, the part that pushed the door sensor (on the top left corner) had broken. If u want a temporary fix remove the cover & put something under it to hold it while ...
machine is still not working and you still get the E10 or F10 error message, you now need to check for a kinks in the pipes, this will probably mean pulling the washing machine out from its housing to
...message F10 is displayed. Turning the machine off and on again as listed in the manual has no effect what so ever, the hoses are not kinked. What else can i try? F10 indicates the pressure switch ...
...looking for a new washer if your going with a top loader stick to the whirlpool there easy to fix cheap for parts and last alot longer. Please remember to rank this opinion and if i can answer any ...
Question about Washing Machines
...put a wash on and the screen reads f-10 my washing machine is wie 157s F10 indicates the pressure switch isn't sensing a change in the water level. Unplug the appliance and take the top off. The ...
...message 3 keeps coming up any ideas ? E3 indicates Drain pump faulty; Wiring faulty; PCB faulty. The service information also says it should stop with the door open. Unplug the appliance and manually ...
...put some wet clothes in, error appairs on display and the door is locked. I tried spinning and about 8 minutes into spin cycle error appeared again, cannot open door The LR error on your non-spinning ...
230 questions posted
Usually answered in minutes!
2,979 Questions
1,498 Questions
358 Questions
151 Questions