Question about Maytag Neptune Washing Machines
plastic bag covering the pressure switch. Press in the locking tabs on the back of the pressure switch and pivot the pressure switch off the pump bracket. Grasp the pressure switch and lift the nipple
plastic legs on the rear of the machine/motor control assembly are fitted into the console tray. Lift the front of the control assembly to pivot it out from the console tray. Reinstall the new machine
plastic legs on the rear of the machine/motor control assembly are fitted into the console tray. Lift the front of the control assembly to pivot it out from the console tray. Reinstall the new machine
plastic legs on the rear of the machine/motor control assembly are fitted into the console tray. Lift the front of the control assembly to pivot it out from the console tray. Reinstall the new machine
plastic legs on the rear of the machine/motor control assembly are fitted into the console tray. Lift the front of the control assembly to pivot it out from the console tray. Reinstall the new machine
...plastic at all. I was gently inserting a flat head screw driver UNDER the lip of the black gasket but could not get the plug to come out...after about 15 minutes mucking about with two flat heads and ...
plastic harness support on the inside that is held by two posts from the mechanism. The mechanism slides up then out from the harness support. You need to be careful not to damage the drum seal. It is
230 questions posted
Usually answered in minutes!
2,979 Questions
1,498 Questions
358 Questions
151 Questions