Question about Maytag Neptune Washing Machines
Switch Assembly If the washer won't drain the door lock assembly should be checked. The door lock can fail either mechanically or electrically. Test any switches on the door lock with an Ohm meter
...purpose is to keep the unit from spinning if the lid is opened so no one looses an arm, etc. generally the console on those machines hinges over backward so you can remove the cabinet top and 3 sides ...
Question about Kenmore Washing Machines
...washing machine keeps acting like the door isnt locked when it actually is. is there a way to bypass this sensor? Door locks are an important safety device. Did you read the story about the young boy ...
...can bipass, but better to replace switch, they should only cost about $10. It is there for safety
Question about Whirlpool Washing Machines
...washes but will not spin Probably a broken lid switch. You can bypass the lidswitch for testing purposes to see if that is the problem. Their are 3 wires. A green ground wire and 2 live wies.
...just a little. FRONT load? THEY DONT USUALLY HAVE THAT OPTION AS THEY USE VERY LITTLE WATER AS IT IS FOR A PURPOSE. THE WATER LEVEL IS DETERMINED BY THE WATER PRESSURE SWITCH AND THAT IS NOT ...
...switch. Over time these simply fall apart. Your machine will allow the washer to wash with the lid open so you can add bleach after the wash cycle starts. But it won't allow the washer to spin unless ...
Question about Maytag Neptune Washing Machines
...washing machine in a spin only cycle nothing happens and the timer counts down also. I did the "motor control test" as specified in the service manual: * Disconnect the power * Open washer and ...
Question about Maytag Neptune Washing Machines
...washing machine will not fully discharge water after the rinse cycle...HELP??? Check the drain hose and clear it from any debris that might be blocking the water from draining out completely. If the ...
...to do that http://www.youtube.com/watch?v=XAnQ6Ovvnuc as that video states ONLY bypass for testing purposes it is not a recomended repair to fix your washer...REPLACE the lid switch if ...
230 questions posted
Usually answered in minutes!
2,979 Questions
1,498 Questions
358 Questions
151 Questions