Maytag Neptune MAH6500A Front Load Washer "washing machine flashing lights" Questions

washing machine fills up then all of the lights start flashing and a LR appears. Have tried unplugging, restarting, etc. but nothing works. Any suggestions? Thanks! Lr means locked rotor basically you

washing machine walks while spinning already had bearing replaced but still wobbles badly during spin even though leveled A common problem with noises from washing machines has been the under wire ...

...flashing pause mode.Thanks. No erro codes to the console correct? If so see if the machine will complete a Spin Only cycle with no clothes in the wash basket. Set the Spin setting to Spin/Hang dry ...

...lights Possible that the control board is defective. Remove the board and check the connectors and the wires from the board. If there is dry joints or loose connections this is possible, only if the ...

machine is part of Maytag's recall... http://www.washerrecall.com/ or this site for details on the recall... http://www.cpsc.gov/cpscpub/prerel/prhtm... Had the same issue, cycle normal light keeps on

...machine to work all lights flashes and cant put in any cycle and want cut off have to unplug sometimes this solves the problem and can start machine.but it will not let me chose what cycle to put it ...

front display lights up and flashes www.maytag.com/support

I have a maytag NEPTURE MODEL # MAH6500AWW front loading washer, the control light START BUTTON IS FLASHING AND WASHER WILL NOT START you can try to reset it by unpluging for about 15-20 mins to let ...

I have a maytag front loader 4000 series and the control lock light keeps flashing and wont go off.. press and hold the lock button down for 3 seconds and it should unlock. if it does't then the ...

what does nd stand for Hello, the ND showing simply means "no drain"and it is probably just something caught in the pump.It may be something like rubber bands,toot pick,a bra wire,or a lens from a ...