Question about Maytag Neptune Washing Machines
...problems for this unit. Be it the dispenser not being flushed, incomplete rinse cycles, low water on wash cycle. If the unit cannot get enough water into it during the allotted time to fill ...
Fabric Softener Won't Dispense The fabric softener dispenser does not dispense. The soap and bleach do dispense. The fabric softener dispenser is notorious for clogging. Liquid fabric softener is ...
Question about Maytag Neptune Washing Machines
Bleach and fabric softener dispenser will not empty out. Have rinsed the container but problem persists hello, so you cleaned out the dispenser and cleared the holes under the dispenser cap. low water
I have had two bleach dispenser valves fail in the past two years on my Neptune TL washer. They simply won't dispense the bleach from the reservoir. Is there any underlying problem that may cause ...
...TL washer FAV6800AWW. For the FAV6800A or FAV9800A: If you have no water flow to the Softener dispenser or Bleach dispenser see if you can turn the dispenser valves on Service Mode and verify ...
Question about Maytag Neptune Washing Machines
...have beach dispenser breaking problems. Take some time and read the 1622808 manual (our Bible) above paying close attention to many of the notes from pages 40 - 45. Thanks for choosing FixYa, ...
Question about Maytag Neptune Washing Machines
...out like a water fall.Any ideas? tHE PROBLEM IS YOU NEED TO CLEAN YOUR SOAP, SOFTENER AND BLEACH DISPENSER, REMOVE THE BLEACH AND SOFTENER DISPENSER TRAY, AND YOU WILL FIND THAT IF YOU HAVE BEEN ...
Bleach/softener dispenser Could you please tell me what could b the problem if the bleach/softener dispenser does not work? Thank you. Try to push a plastic straw through the hole in the dispenser. ...
Question about Maytag Neptune Washing Machines
Maytag Neptune Washer dispenser unit has mold and mildew inside top of dispenser compartment. Maytag Neptune washer dispenser housing compartment has mold and mildew on the top of the inside dispenser
...AND FABRIC SOFTNER PROPERLY. THE SOFTNER IS LEFT IN THE HOLDER AND NOT DISPENSED. I CLEANED THE DISPENSER IN CASE IT WAS CLOGGED. IT DID NOT HELP. "downy ball" is designed to open at the end of ...
3,973 questions posted
Usually answered in minutes!
1,498 Questions
358 Questions
175 Questions
151 Questions