Maytag Neptune MAH5500B Front Load Washer "door hinge" Questions

...hinge area slightly. Draw the door assembly away from the machine. This will disengage the hinges from the slots in the front shroud (Figure 5-1). If the hinges bind, press out on the plastic shroud ...

...door hinge straight out of the slot. On the opposite side of the opening you will find two inserts, remove them and install them into the slots you removed the door from. Now the fun part... remove ...

Door must be slammed hard to close. How do I fix this? Do you suspect that the reason the door won't close easily is because of bent door/hinges or some other reason? If it is because of bent hinges a

Front load washer and dryer door change. My wife wants to swap the hinges for the doors on our washer and dryer. It looks as easy as swapping the hinges and other small pieces. Is this correct or is ...

...door hinge on and pull off door..remove screws where door hinge would be if it were mounted on the other side..place flatblade screw driver between front panel and cabinet and gently pop off front ...

...the dryer and dryer vent is 4 feet away on other side of washer. Is it possible to reverse the doors on each of these machines? I know, we didn't think this thru and 5 yrs is a little late but ...

the door has become very difficult to close! We have to slam it. check srews on hinge tighten as needed might have gunk buil up in hinge clean as needed

...door hinges and plastic covers on the unused hinge screw holes on the opposite side of the door opening (door is reversable, so there are places to mount hinges left and right). Front panel will now ...

how does the case come off the base to access the motor control board two screws in door hinge two opposite remove door remove cowel around door tada

door hinge screws, lift door and hinges, door should come off. opposite side of door opening remove 2 screws opposite form door hing side. Now the front panel will pull off front the top. Ease the top