Maytag Neptune MAH5500B Front Load Washer "removing shipping bolts" Questions

Shipping bolts for Maytag Neptune Where can I get the bolts to secure the drum for shipping? We're moving from one house to another. The installer did not leave the bolts after installation. Maytag ...

does this machine have a shipping pin that needs to be removed where is the shipping pin located No there is not any shipping bolts.

...shipping bolts before the plug will release. It is so important that these bolts be removed that the manufacture designed the plug to be stuck inside until all 4 bolts are properly removed. The ...

...around and damage anything,if you have the origanal shipping bolts from when it fresh out of the carton use those by removing back panel and push down tub till it lines up with shipping bolt ...

...a thud noise Did you remove the shipping bolts from the back of the machine I have a gas dryer same model- look at the front of the drum at the seam. Mine is cracked and causes a loud thumping ...

...this is a new machine, did you remove the shipping locks from the back before using it? They have plastic strips attached to them, make sure they have all been removed, as well as any shipping

...it will start the shaking and then stop spinning. any suggestion on what the problem might be. tammy I had the same problem, once I remove the shipping bolts on the back of the machine it worked

moved the washer out of its level,meaning that all four legs are not touching the ground firmly.The Neptune problem your having is un-common unless its on a pedestal. did you remove the shipping bolts

...You do not say there is any noise, is the unit walking on the floor? When new and installing there are shipping bolts and or straps to remove before using...... good luck, enjoy the ...

loud noise how to locate shipping pin and how to remove it when i find it? I don't believe there are any shipping bolts on that unit.