...bolt from the pulley wheel on my indesit we16 have already broken two tools is it a left hand thread ? any tips please Try to turn couted **** wise It's a normal thread but has been fitted
...spins the bolt on the drum un loosens and the machine stops spinning help please Purchase Lock tite thread locker. Loosen bolt, apply this stuff on the bolt threads. Then retighten bolt. This bolt ...
Question about Washing Machines
!! I held the start button and the delay start button to try I had a similar problem and found this thread helpful: http://www.fixya.com/support/t652698-machine_start_clicks_turned_door_open It turned
...the screw holding the agitator to the shaft and lift the agitator out.Then purchase some Loctite thread lock from you local hardware store.Put some thread lock on the thread of the bolt and re ...
Question about Whirlpool Washing Machines
thread on the shaft for teo pal nuts, the regular locking nut may not engage the locking insert, in which I would use the Locktite. Are you sure you didn't install a thrust washer on the wrong side of
Lower loop thread falls out The lower loop thread on my Kenmore over lock 2/3/4D machine falls out of the needle after 4-5 inches of stitching. It is threaded properly and on a lower tension number. I
thread but it will not loosen pounding it with hammer and chisel whirlpool model? very difficult without a spanner wrench .no its not right hand threads so it is a left handed locking nut, meaning you
Question about Maytag Washing Machines
...remove any oil or dirt. Apply Loctite thread locking compound to the exposed threads and then tighten the bolt securely. Allow for the locking compound to dry overnight before using the machine
door on ge front loader washer leaks, door gasket is fine. Could it be the lock not working properly Yes it could be the door lock not pulling the door in enough to make the seal. Solution... Remove ...
the 13/16 nut that holds the tub down keeps falling off the 13/16 nut that holds the tub down keeps coming loose i have tried everything to keep it tightened what could be done to help me solve this ...
201 questions posted
Usually answered in minutes!
2,979 Questions
1,498 Questions
947 Questions
680 Questions
658 Questions