Maytag Neptune MLE2000A Front Load Stacked Washer / Dryer "breaker trips during spin cycle" Questions

...trips circuit breaker during spin cycle The try unplugging the motor then put onto spin it will pump out ok and run othewise spin if all else is fine ,next reconnect the motor if it trips again then ...

...During a wash cycle, the wash machine made a few loud clanking sounds, came to a halt, and turned off. As I was removing the soapy clothes, I noticed a burning smell. The breaker was not tripped so ...

...breaker (or replace the fuse) if necessary. Lid Switch The main control for the washing machine is the switch inside the lid. If this has stopped working for some reason, your washing machine won't ...

...trips breaker during spin cycle. UK During the spin cycle, the machine will sound like it's spinning up even faster, followed shortly by the breaker tripping everything in the house. The lights, the ...

...breaker trips during the fill cycle then it would be the walter inlet valve or the timer in the control panel; if it trips as soon as it is in the agitator cycle - then the motor or transmission; if ...

trips my electricity circuit and TV switches off along with other appliances. Can you tell me what's wrong with machine? This tells me that you do not have an overload situation. There is a short, and

...there is another outlet that is on the same circuit and the combined load trips the breaker. Shut the breaker off and try any other sockets in the area to see if they went dead too. Hope this

...during the permanent press cycle (no others), but has since completely stopped working and now throws the breaker (not the GFCI it is plugged into). I replaced the timer, but this was not the issue. ...

breaker trips, check the machine for leaks or damaged insulation on a wire or several wires. If the lid switch is getting damp, that would stop the machine. The leak or damaged area is probably fairly

...trips the breaker. During washing, spinning, drying? If it is during drying don't use that cycle- it could be the dryer heating element. A supressor is normally used on the motor to supress the ...