...bolt to ensure it is tight. DO NOT overtighten as this can restrict movement of the agitator or damage it. Tighten until snug. Replacement parts can be purchased at any of the following websites: ...
...bolt, but I could imagine there might be. Let me know how it goes, and if you need any further information. I will keep looking for more information for you as well. Jim As far as I can tell, the ...
...Stay clear, and watch your hair and hands. Once the machine is full and starts its cycle, look for leaks. Let the machine do its cycle and as it goes into each part of the cycle, look for the leak. ...
bolt on the side but will not come off . when it is spinning it sounds like metal to metal grinding. 1. Find out where the leak is coming from. Does it leak constantly or during one part of the cycle?
...bolt on the bottom of the drum in the middle is wet and water drips from there. Does the drum need to be resealed and how hard is that to do? Seems like taking it apart could be an all day job. Any ...
...stay down. There are no obvious reasons. Do you have any ideas????? Cheers Karen try this,remove the dispenser top and cup on top of the agitator and see if the 9/16" bolt is tight on the top of the ...
...Stay clear, and watch your hair and hands. Once the machine is full and starts its cycle, look for leaks. Let the machine do its cycle and as it goes into each part of the cycle, look for the leak. ...
1,827 questions posted
Usually answered in minutes!
2,979 Questions
358 Questions
175 Questions
151 Questions
