Maytag Neptune FAV6800AW Top Load Washer "lock" Questions

I have a FAV6800AWW Maytag washer. The lid lock clicks several times when you try to start the wash cycle. The locked light never comes on and it just sits without starting. I disassembled the left ...

says FL and won't run A Door Lock Error occurs if the door cannot be locked. It will try to lock it six times before displaying the error code. Possible Causes / Procedure ? Door lock mechanism is ...

Lock light wont turn off The lock light will not go off and I can not start it. have fixed it once by pulling out the locks and then pushing them back, the light went out and it worked but not now. ...

..., You should open up a separate problem for this but I will post as a solution for the Lid Lock Issue. For the FAV6800AW that is you machine type correct? The "LO" console error is "Lid has ...

It keeps dispaling FL in the panel Hello, the FL displaying on the panel simply means Failed to Lock. Door lock monitor switch in door lock mechanism unable to communicate to control board the door is

...a moment later remembered I wanted to add something, I paused the washer, waited for the door to unlock, i added an article of clothing , but the door would not lock and finish the cycle, it would ...

door is locked and has a code of FL on panel i had this happen a few months ago and had the owners manual and got the codes out of it and went ,got the part and fixed it.. my manual is now gone.. need

FL keeps coming up on machine The "FL" is indicating that the door has failed to lock or it locked but the control does not sense the door has locked. It could be caused by: faulty door lock solenoid ...

why does my lid lock keep flashing? changed lid lock but having the same problem. There is a right lid lock and a left lid lock which did you change? The left lid lock is a lock and the reed switch ...

the lock light flashes and the machine continues to try and lock even though it appears to be locked...stops filling Maytag neptune TL Are you up for troubleshooting? I will try to keep it low tech. ...