Question about Maytag Neptune Washing Machines
nothing happened. pretty bad when i can work on cars and fix them but can't fix a washer. I had a similar problem on my Neptune. All the machine would do is beep. I believed it was a stuck button so I
Question about Maytag Neptune Washing Machines
nothing happens. does the "door locked" light ever come on? if it does, you may be able to get away with just the wax motor in the latch assy. Usually this call requires a control board as well. A bad
Question about Maytag Neptune Washing Machines
...nothing. I'm assuming this is a very bad thing but if anyone has any advice, it would be very welcome. Thanks in advance! -Bill hi there, sounds like you may have had a power outage or tripped the ...
Question about Maytag Neptune Washing Machines
...Nothing happens when you press the other buttons. Most of the lights for the additional options are out too (e.g. water temperature - it's stuck on hot water). I basically can only wash on "Enviro ...
Question about Maytag Neptune Washing Machines
...nothing happens? WASHER WILL NOT START: Power If your washing machine won't start, begin by looking at the power source. First of all, is the washing machine plugged in? If it is, has it tripped a ...
...nothing will light up. Is there a fuse inside that needs replacing? How can I get the door open to get the wet clothes out? Thank you Try first putting the control on 0 , then unplugging power cord ...
...nothing was happening but the Sensing Scroll Message.. I had to push the power button to stop it. I then pushed start but I still kept getting the error message scroll " Sensing " I started over by ...
...nothing happens. Locking controls The Control Lock prevents unintended use of the washer. You can also use the control lock feature to prevent unintended cycle or option changes during a cycle. When ...
control locked light came on and nothing will work First remove the plug for 5 minutes and this will reset the system. Check to see if the light beside the LOCK ICON is lit on the status lights. If it
...on and I cannot find a way to reset it or get the machine to work any suggestions? Control lock light is lit. Nothing else works. Door will open. Hold down "end of cycle" button for 3 seconds. ...
1,827 questions posted
Usually answered in minutes!
2,979 Questions
358 Questions
175 Questions
151 Questions