...wash water leaking down on the Clutch Pulley I feel you have a Tub Seal leak. The issues could be related to the drain hose/drain pump or cracked outer tub. I don't troubleshoot on this forum to ...
...see the drain boot. Remove the boot from the tub and check for any blockage. Also, while you have the boot removed, check up in the tub for any small pieces of clothing that may be hung up in
Question about Maytag Neptune Washing Machines
...tub after draining. This is normal for most washers. Purchase a container of Oxy-clean and cycle the washer a few times using hot water settings with a half-cup of Oxy-clean added to each cycle. This ...
Question about Maytag Neptune Washing Machines
...inlet line and check for damage in filter.If not check inside your tub for traces of sand.Remove drain hose/drain valve and clean external tub to wash away all dirt using a jet wash. hope this ...
...remove the front panel and check that tub is being supported by the front and rear struts properly see pages 40 thru 43. With the front cover removed check the mounting of the Tub Displacement Sensor ...
...wash? there is a green pull cord hidden at front of detergent compartment to open door. if it did not drain but pump tried, then clean out hose to pump in rear of unit. remove rubber hose from tub at ...
...wash and rinse cycle but does not drain during the spin cycle. it give an dc code during the spin cycle which i know that means unbalance but what does that have to do with draining? Clutch issue and ...
Question about Maytag Neptune Washing Machines
...Wash. f. Pull tub to the front left corner while pushing the tub down the display should change to ?UO? (Unbalance open). Release tub and the display will show ?UC? (Unbalance Closed). If you fail ...
Question about Maytag Neptune Washing Machines
...Remove and clear the drain hose of all coins. Spin the tub by hand and listen for coins. If a coin(s) make a clanking sound, lean the machine forward ad spin the tub then backward and spin the tub ...
wash tub, drain lines and pump sanitized. CHECK AND CLEAN THE DRAIN PUMP FILTER. Accumulations of debris in the drain pump filter can also cause odors. HINT: If you own a shop vac, pull the drain hose
1,827 questions posted
Usually answered in minutes!
2,979 Questions
358 Questions
175 Questions
151 Questions
