repair company. This could be a Control Board issue or issues with the Left Hand Lid Lock. We would need to go into Service Mode and see if we can activate the Lid Locks ie Lock them then release them
Question about Maytag Neptune Washing Machines
...repair information on most washers and dryers. I think you'll find what you need there. Don't worry about the timer, they hardly ever go bad. Good luck with it. If I have helped you, please rate my ...
...lock light does not come on and the water is not running in machine From what you've described, the problem may be a defective "door safety switch". The purpose of the lid/door switch is to prevent ...
Question about Maytag Neptune Washing Machines
...lock doesn't go on. i unplug and wait for 15-20 minutes and do the same thing. and nothing happens? WASHER WILL NOT START: Power If your washing machine won't start, begin by looking at the power ...
Question about Maytag Neptune Washing Machines
...repair person but I know the machine well at least I know there is no wax motor for the door switch?? it?s a push/pull relay for both the Left and Right lid locks and it?s a TL not a FL. If you handy ...
Question about Maytag Neptune Washing Machines
...Repair Tech? Have you reset the 120VAC power on the machine? If not give the Control Board a hard reset by pulling the washer power plug for 10 seconds or so and then re-power up the machine. I?ll ...
...lid locked, no lights, LCD is black. Appeared totally dead. There is 110v power at the wall outlet, and 110v power going into the pin on the lower left corner of the board. I ordered and installed a ...
Question about Maytag Neptune Washing Machines
...repair manual on this site search for this; FAV6800 Manual. Check the postings and you will find a URL to the manual. From another member a step by step to dump water from machine in diag mode ""One ...
Question about Maytag Neptune Washing Machines
...lid is locked so we can't get our clothes out. the control module is bad.... have it serviced again.. Hello tim_merritt, Sorry to hear of the new issue. You can release the washer top from the base ...
1,827 questions posted
Usually answered in minutes!
2,979 Questions
358 Questions
175 Questions
151 Questions