Maytag Neptune FAV6800AW Top Load Washer "starts fill stops" Questions

...starts to fill with water, but a couple seconds later, it shuts down completely. If we push it again a minute later, it starts again, but just as quickly, stops filling a few seconds later. Please ...

Maytage MAH6500AWW Overloaded washer now leaks when filling I put in a comforter which was too large, but I have washed sleeping bags and other large articles before with no problem, so I closed the ...

...starts by turning the water on, but it won't stop filling with water It just keeps filling unil I turn the water off. Water leaks from the door until the waterline is below the lower lip. if you ...

MY NEPTUNE MAH4000AWW WORK WHEN IT WANT TO WORK THE MACHINE FILLS WITH WATER THEN STOPS, HIT THE START BUTTON IT START AND STOP AGAIN. IF I ADVANCE THE TO THE NEXT SETTING AND STOP AGAIN BUT WHEN I ...

washer started and then stops mid cycle started yesterday, set dial to normal settings and washer filled and started but about half way through it stopped and now it runs for a minute or two and then ...

...stops the water and allows it to start the next cycle. It's a switch either in the control panel or at the top of the tub with a small tube connected to it which goes down between the inner and outer ...

...fill valve.. if water stops possible water level switch or small hose to switch plugged ..drain washer remove screws on each side of door frame front will pull off...small hose on some models was ...

maytag neptune stackable washer dryer stopping I can start the washer any were at any seting, it will shut off randomly. some times you can not get the start button to re-acivate washer, i found that ...

Maytag Neptune TL washer overfilling I have a Maytag Neptune TL FAV6800AW and it will not stop filling with water, It will overflow. There are no error codes. It did it 3 days ago and a tech came out ...

FILL TUB WITH WATER HEAR NOISE BUT NO WATER AND STOPS AND 24 MIN QUICK WASH CYCLE, NOT SURE WHERE TO START. Hi, If your washing machine will not fill, only hot or cold will fill or is slow tofill then