Maytag Neptune FAV6800AW Top Load Washer "tl locked light" Questions

...TL locked lid light stays lit My Neptune TL has the light indicating a locked lid, yet you can open and close the lid, but I cannot get the washer to start....any ideas? foxste I will give you a few ...

...TL Okay, I replaced the left lid lock and the 'locked' light still doesn't go out. I don't get any error code anymore but the machine doesn't lock or start up. I ordered the magnet too but have no ...

...locked...stops filling Maytag neptune TL Are you up for troubleshooting? I will try to keep it low tech. Do both Lid locks remain locked (you can't open the lid ) and you just have the Locked LED is ...

...TL washer, doors won't lock, thus washer doesn't work. I did the board test that I got on this site, and discovered that the right door lock is working but the left isn't. Any ideas about why we ...

...TL I have "OD" message on my display. Do I need to replace left lock mechanism (part # 25001048) Puy knife inserted at the outside cornes opens it up and you can play arround with them with you ...

...TL not a FL. If you handy you and you just need One-Way Roller clutch bearing clean up and re-lube the cost may be for a can of WD-40 and some light lithium bearing grease. Post back I?ll try to help ...

...TL FAV6800AWW stops on the spin cycle (~11 min). I can see and hear the tub tumbling kind of hard even though it has small amount of clothes. I already removed the clutch and lubed with light grease ...

Only one of the wash cycles on my Maytag Neptune TL washer still works. Nothing happens when you press the other buttons. Most of the lights for the additional options are out too (e.g. water ...

Neptune TL: The washer is not locking to start the wash. The washer is not locking to start the wash. All of the lights are on (as normal), but when pushing the START button, it does not Click and ...

...TL FAV6800AWW Washer stopped during spin cycle, lid locked, no lights, LCD is black. Appeared totally dead. There is 110v power at the wall outlet, and 110v power going into the pin on the lower left ...