Question about Panasonic Lumix Cameras
...flash won't turn on. Panasonic DMC-Z28 - the flash button does not call up a flash setting menu and so the flash won't turn on. Is your Z28 set up to do burst shooting as this will stop ...
dmc gf1 flash won't work lcd says "please turn camera off and then on again" The camera requires service, this is a nag screen and will not reset itself without being serviced.
...won´t flash either if you set it on forced flash on. It also says "please turn camera off and then on again". Any suggestions what isa wrong and what can be done? Hello The problem ...
...or with an inoperative flash. They won't work for every case, but they're worth a try. (Hint, make sure that all the screws around the perimeter of the case are present and firmly
the flash but won't take a picture. When I take a picture in manual mode it's really dark, even though the flash goes off. Push your shutter 1/2 way down. See whats the readings in view finder
...then change batteries. The light indicator goes on but the flash won't respond. If I turn the flash off, the camera takes the photo without a hitch. You will need replace the Flash
...the flash on The flash instruction begin on page 8 of the manual. Bear in mind that the flash won't work in macro mode, only in far mode. Also, the flash is for still photos only, not for
...on the top screen...cannot open flash and cannot clear message so camera won`t operate? in the view F---564 is flashing??? Got the same problem here in Paris - methinks probably circuit board ko
...won't turn on. I've tried the reset button but it still won't work. The Coby sign just flashes two times, then turns off. How do I fix it? You need to upgrade your firmware. Follow ...
...on the camera needs to be turned off and that the flash itself is charging up and won't allow a picture to be taken. Try turning the flash off and see if it will let you take a picture.
300 questions posted
Usually answered in minutes!
630 Questions
338 Questions
296 Questions
207 Questions
202 Questions