Maytag MDE9700AYW Neptune 174 Electric Dryer "heating element" Questions

Ad

Question about Maytag Neptune Washing Machines

1 Answer

heating element, turn thr dryer on and try ranging slowly,a minute each through the cycles if no heat-it is almost immediate, I would SUSPECT the heating element. I do not know how to access it but it

Ad

Question about Maytag Neptune Washing Machines

2 Answers

...heating element and still nothing. What else could it be? Hello there and welcome to fixyaHeating element Often a dryer heating element burns out, but doesn't trip the circuit breaker or blow a ...

Ad

Question about Maytag Neptune Washing Machines

1 Answer

...heating element burns out, but doesn't trip the circuit breaker or blow a fuse. The heating element is simply a long coil of special wire. You can check it for continuity with an ohm meter. No ...

Question about Maytag Neptune Washing Machines

1 Answer

...heating element for continuity with a multimeter if it has more than about 30ohms it is bad.Next check for 220v-240v at the heating element with the dryer running (This is not a test for an amateur. ...

Question about Maytag Neptune Washing Machines

1 Answer

heating element, be sure to visually check the element as well becqause it could just be shorted out internally giving you a reading, but first and foremost check your voltages be sure you are getting

Question about Maytag Neptune Washing Machines

1 Answer

...is no heat to dry the clothes youve probably got a bad heating element, also make sure air is blowing out back of dryer to the outside of house if its plugged it will cause element to break good ...

Question about Maytag Neptune Washing Machines

1 Answer

No heat. I have checked the resistance on all three thermostats and got a reading of .1 on all of them. Any ideas on what to do next? The OHMS reading confirms that all the coils/elements are in good ...

Question about Maytag Neptune Washing Machines

1 Answer

no heat Everything seems to work ok, but there's no heat. No error codes either. Possible failure of the element, fault in the wiring harness or connector or failure of the control panel or output

Question about Maytag Neptune Washing Machines

1 Answer

...heating element. our dryer doesn't dry, where is the heating element located? the heater is under the drum, remove the screws at the door hinge anda the screws on the other side of the door opening ...

...not heat. 1. Your limit switch is out on the dryer not allowing the heating element to switch on. 2. Your heating element is out. before you try to fix this yourself it should be covered by

Not finding what you are looking for?
Maytag MDE9700AYW Neptune 174 Electric Dryer Logo

230 questions posted

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

jimorris77

Level 3 Expert

411 Answers

Sheldon Dedek

Level 3 Expert

909 Answers

Bill Long

Level 3 Expert

606 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...