Maytag MDE9700AYW Neptune 174 Electric Dryer "hot" Questions

...a problem with the automatic temperature control. Here is the problem. If I select cold/cold, I get hot water for wash and rinse. If I select ATC cold/cold, I get hot water for wash and rinse, If I ...

Washer does not allow hot water to enter machine when you press the heavy duty button. Regular warm cycle or hot works fine. Replaced the water valves, main control panel. Hi, This is a common ...

Maytag Neptune MAH7500AWW will not fill from hot water side The machine works fine if set in cold wash cycle. Will not fill from hot side in warm or hot cycle. Please help. I am pretty handy with a ...

I have a 14 year old Neptune that run great except now no hot water. There's a fill valve combination on most washers. On the simpler, cheaper models they're simple to change. It's where the hoses ...

maytag neptune washer hot water fill problem maytag neptune washer hot water continues to fill even during spin/drain cycle, results in extra water in unit/spillage b/c water can never drain all the ...

No hot water for a Maytag topload washer I can not get any hot water when I use a hot water wash on my Maytag toploader washer, model LAT6914AAE. The cold water does fine. Turn the water off and ...

The hot water was mistakenly on the right and cold on the left. Hoses were hooked up, not knowing this. Half way thru the cycle, the error was noted. We reversed the hoses, but it works the same. ...

hot water when cold is selected Wife says hot water only no cold. Selectedd cold / cold and machine fills with hot water. ""Selectedd cold / cold and machine fills with hot water."" Is your machine a ...

Getting hot water only into the tub. Is that a bad mixing valve? Where can I get one for a VERY old Maytag Washer? The cold water valve could be faulty. It's quite possible that the valves haven't ...