no power to board power goes from cord to the mei filter but no power at board Is there power coming out of the mei filter to the board?
...power to the board itself. The door light works too. unit was bought in Feb. of 2005 but only used the last 2 years. This board looks like big money. How can I test the output of this board. I have ...
...board power source is good to control board however, it remains blacked out. no led light, nothing. Light comes on at the door when opened. wondering if that may be my only problem, wife stated that ...
...board is sending power to the motor control board. If it is you need the motor/ motor control kit (just one part #) If the main board is not sending power to the motor control board, you need a main ...
Question about Maytag Neptune Washing Machines
...board +12VDC power supply. +12VDC could be measured at the Control Board Conn P3 Pin 3 or 4 referenced to Control Board common Conn P3 Pin 1. If there was no +12VDC generated by the Control Board I ...
Question about Maytag Neptune Washing Machines
...board or power supply. Thought it was the door switch/grounding issues/loose wire, etc. Finally found that there was a bad capacitor on the circuit board. It was a 15 cent part that, when replaced, ...
...but it's not working. Any ideas??? Hi there, you are experiencing a power supply board failure. this board may have used all its life up and unfortunately, it will have to be rebuilt or
...Board failure. I would try to recycle 120VAC power to the washer. Leave it off of about 20 minutes then re-power up. If that doesn?t clear the issue then I believe your Control Board has failed. Do ...
Question about Maytag Neptune Washing Machines
...power to the control board. There are no internal fuses that I?m aware of in the machine. Power is applied to the machine thru the main system relay K6 per the FAV6800AW schematic The FAV6800AW ...
...board. With the power off and harness removed from the door lock mechanism it should ohm out at 950 to 1100 ohms at room temp. If this passes the test another area to look would be the timer and ...
230 questions posted
Usually answered in minutes!
2,979 Questions
1,498 Questions
358 Questions
175 Questions