Question about Maytag Neptune Washing Machines
circuit board on my 9 year old neptune washer went up in smoke. Do I replace the circuit board or by a new washer? Thank you! Check the price of a new circuit board against the price of a new machine.
Question about Maytag Neptune Washing Machines
...Circuit Board and WAx Motor. Can this be fixed by a do it yourselfer? To be 100 % sure ,do this ,pull the whole face panel forward (remove the 3 screws on top face panel and may have 2 more in the ...
Question about Maytag Neptune Washing Machines
...board would burn out, but, as far as repair kit im certain that they were trying to get all circuit boards and motors back to only one model, instead of having 5 or six different boards andmotors, ...
...circuit board. I have the same problem. If it mis the circuit board is this something that we cdan do ourselves? I have changed the circuit board myself and also the wax motor for the door. these all ...
...circuit board at r11? It is true it lookes like a tiny burn at r11. Thank you for your help! The R11 burns because the wax motor jams. If the R11 is burnt, it is time for a new circuit board. These ...
Question about Maytag Neptune Washing Machines
circuit board about 8 months ago for another problem. check the circuit board again front and back look for burns ---should also replace the door lock assembly it is the cause for most machine control
...circuit board with a burnt out area. I want to know what is the reason for the circuit board overloading? Will it happen again if I spend the time and money to replace the circuit board without ...
Question about Maytag Neptune Washing Machines
...circuit board, however, the machine fills with water, but when it comes time for the motor to actuate, the on light goes off. A few months ago, I had also replaced the wax motor for the door and it ...
...CIRCUIT BOARD BEHIND CONTROL PANESL. #3 PUT IT BAD CIRCUIT BOARD. WORKED FOR 6 DAYS THEN BACK TO SAME THING. #4 DETERMINED TO BE BAD CIRCUIT BOARD AND MOTOR AT BOTTOM. I SAID I'D THINK ABOUT IT. ...
...circuit board is bad - Do U know where I can get a schematic of this board ? Looks like Q3 on this board is burnt. Thanks, John ajshoe, I'm not familiar with this particular model but I will tell you ...
468 questions posted
Usually answered in minutes!
2,979 Questions
1,498 Questions
358 Questions
175 Questions
151 Questions