...in drum when i turn the drum its seems water in in drum thats normal forthins machine they actuall use a water filled front ring for balance, woll always sounds as water is there. desgined that ...
...drum seems to be off it's trueness like a bad tire, the front of the drum has alot of play making a thud noise Did you remove the shipping bolts from the back of the machine I have a gas dryer same ...
Question about Maytag Neptune Washing Machines
what is the drum capacity size on the orig maytag neptune washer? I cannot seem to locate a tag with such information Drum size or capacity for the Neptune Model Number MAH4000AWW is 3.4 What is the ...
...seems like whatever the bearing system is for this model - one side bearing must be worn or broken for the drum to move that far off axis (approx. 1 1/2") it appeares that you need to replace spinner ...
...seems ok That is a tough one, especially since you indicate that the bearings are okay. The belt not wanting to stay on a Maytag Neptune washer usually does not bode well. It is usually an indication ...
Question about Maytag Neptune Washing Machines
...seems level. ok,,your not going to like me now!!! open the door and spin the drum by hand,,,it should spin quietly,,maybe just a slight sound from the motor turning,,,if it sounds like gravel and ...
Question about Maytag Neptune Washing Machines
Maytag Neptune MDE9700AYW Elec. Dryer. Drum Not Turning Maytag Neptune MDE9700AYW Electric Dryer. Drum Not turning. When it does turn it makes a loud banging noise and shakes. Had noticed that it ...
Question about Maytag Neptune Washing Machines
my neptune washers drum wont move could it be a belt the cycles seem to work but after it fills or after it has removed the water it just sits there and the drum dosent move it could be a belt but in ...
Question about Maytag Neptune Washing Machines
seems to be water below the inner drum. Is this normal? Some water yes. a lot of water no.As long as the water stays below the wash tub you should be OK. You might want to pull your water pump off and
Question about Maytag Neptune Washing Machines
...Seems that the drum has shifted and there is movement between the rotating drum and housing. Is there a bearing there? Would it cause a mis alignment of the belt so it comes off? that would be the ...
468 questions posted
Usually answered in minutes!
2,979 Questions
1,498 Questions
358 Questions
175 Questions
151 Questions