Maytag Atlantis MAV6000 Top Load Washer "bad lid switch keep" Questions

Ad

lid codes? the switch can still be bad manually even though it shows good electronically. How ever if its bad you seldom get some agitation then goes off unless ur opening and closing it? once its bad

Ad

Question about Washing Machines

1 Answer

wash you would have a bad timer. if it washes then stops and gets stuck you have a bad lid switch. But then again if you had a bad lid switch it would never spin. What is the brand name of this washer

Ad

Question about Kenmore Washing Machines

1 Answer

...bad,the lid coulld be bad and not do anything and that's why you have to listen for the clicking sound,if it does click and the lid switch is good another thing it could be is that no cold water ...

Question about Washing Machines

1 Answer

...is the same switch as the lid switch and it is activated by a small lever if the out of balance was really bad ,that lever can get on the wrong side of the lid switch and keep it as if the lid is ...

Question about Kenmore Washing Machines

1 Answer

...lid switch is bad its there to keep the machine from running if you open the lid during operation,remove the control panel end caps,then there are 2 screws there to remove and lay the control panel ...

Question about Washing Machines

1 Answer

...bad or missaligned. Most time I find the little plastic peice that in on the lid is broken off and there the switch is not pushed down when the lid is closed. I idea behind the switch is to keep you ...

Question about Frigidaire Washing Machines

1 Answer

...lid lock/switch is bad. What should I read on an ohm meter? The resistance of any mechanical switch is, practically speaking, 0.0 ohms. If you are checking continuity across the two terminals of the ...

Question about Whirlpool Washing Machines

1 Answer

...is on the way out. Contacts inside it are probably arced pretty bad. Might just be a loose lid switch. or a loose lid hinge or the probe that hits the lid switch is not always hitting the sweet

Question about Washing Machines

1 Answer

...bad lid switch. You don't NEED to replace it. Well wait a minute... have you had this machine for a while? Because if it's new to you, there are some washer's that fill while open. BUT if this is a ...

Question about Kenmore Washing Machines

1 Answer

...interlock that keeps the agitation from starting with the lid open. If the switch is bad, or if the actuator is not properly contacting the switch, then the machine will just sit there after it

Not finding what you are looking for?
Maytag Atlantis MAV6000 Top Load Washer Logo

1,252 questions posted

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

john h

Level 3 Expert

29494 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...