Maytag Atlantis MAV6000 Top Load Washer "dial knob" Questions

...dial. However, the way the knob is designed, there will be a lot of wear and tear on these plastic teeth, so they'll wear out on every single machine. Good luck to the many people who will have this ...

in, when we go to set the wash. but it does move manually with finger tips The teeth on the knob are probably gone. To pull the knob off remove the clip between the knob and the dial and pull knob off

...knob and the dial. what happens is the knob has gear like teeth that will become stripped out.it is easy to replace but alittle hard to remove. you need to get a small screwdriver and go behind the ...

...in (I can't remember which position it should be in, but do know that it comes off by turning it counter-clockwise). With the knob off, the dial guard should lift off the center post of the

...purchase a new one? Will any of these do? http://www.repairclinic.com/Admiral-Washing-Machine-Knob-Dial-Button-Parts?s=b101a11pc31 ...

...machine? to remove the timer knob and dial,push the knob in and turn in a counterclockwise direction the knob will unscrew completly off then place a small screwdriver behind the dail and pop it ...

...Model washer KAWE677BW1 I believe that comes off by holding the dial firmly and turning the knob counterclockwise. The dial should pull off. Be careful, I think the dial is an obsolete

...dial for wash cycle. Knob will not move indicator dial. Rotating without engaging indicator. Thanks Pull the center knob strait off. I suspect the center shaft of the knob is broken. If it is order a ...

...knob/dial, removed the console (3 screws behind it), and checked where the timer was mounted to the front panel. There is only one screw holding the timer to the front panel on the left side of the ...

...my Dial to my GE Washing Machine Timer ALIGN TO TIMER Most GE knobs and dials have either a flat spot or notch on the knob that aligns with a similar spot on the shaft. They can only go on one