Maytag Atlantis MAV6000 Top Load Washer "fills" Questions

Ad

Question about Maytag Washing Machines

1 Answer

Maytag Performa wont fill hot water Cold water fills fine, no hot water. I verified that there is hot water coming from the wall. The water fill valve - The water fill valve is a mechanical and ...

Ad

Question about Whirlpool Washing Machines

1 Answer

my whirlpool front load washing machine accept hot water and no cold water entering on the machine. The water fill valve - The water fill valve is a mechanical and electrical part, the coils on the ...

Ad

Question about Tricity Bendix Washing Machines

1 Answer

Washing Machine Rinse and Spin lights are on Tricity Bendix Washing Machine, Wash Rinse and Spin lights are on, but the drum wont spin or take in water. Door is catching as it is closed. Model AW ...

fills, goes 4 minutes and fills, pauses, then fills, pauses then fills, over and over washer set to heavy cycle, fills, runs to 43 minutes then fills again, pause, fills, pause, fills. I push pause ...

Question about Kenmore Washing Machines

1 Answer

My kemore 80 series washer will not fill up It still rinses and spins.I have replaced the water inlet valve and the water level switch. It is still not filling up. What is next? Should i replacethe ...

I have the washer on cold water, but it runs warm, stops, trickles, then comes out warm again, stops, trickles, then warm again ect.On the rinse cycle it will only trickle out. The water fill valve - ...

new machine cold fill only . old machine hot and cold fill new machine cold fill only if i turn off hot fill valve when removeing old machine which had hot and cold fill and leave turned off when ...

Question about Zanussi Washing Machines

1 Answer

...off is, a air tight hose runs from the outer washer tank to the waterlevel control. As the water fills the outer tank air is pushed up the hose,depending on which setting you have made ( small- ...

Question about Maytag Washing Machines

2 Answers

...off is, a air tight hose runs from the outer washer tank to the water level control. As the water fills the outer tank air is pushed up the hose, depending on which setting you have made ( small- ...

Question about Washing Machines

1 Answer

switch needs to be replaced. A good way to test it is to set your machine on low fill and see if it fills past 3/4. If it does, it's the fill switch

Not finding what you are looking for?
Maytag Atlantis MAV6000 Top Load Washer Logo

1,252 questions posted

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

jimorris77

Level 3 Expert

411 Answers

Sheldon Dedek

Level 3 Expert

909 Answers

Bill Long

Level 3 Expert

606 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...