...runs when it should be cold and the cold water is turned on turn your water off and remove your hot and cold lines and reverse them sounds like you have your hot and cold water supply lines
...Hot cold, I get cold water first, then hot water for the rinse. Any ideas as to what could be the problem. It sounds like you have the hot and cold water lines to the washer reversed. Try turning off ...
...the hoses may be reversed...select cold rinse and turn on washer...if its hot..then try cold wash, is it hot? then try hot wash...is it cold? if so, check your hoses are on correctly....reverse ...
...hot/cold now reversed Maytag performa washer hot and cold valves are hooked up correctly, but washer is giving hot water on cold setting and cold water on hot setting. Just happened suddenly after 1 ...
Hansgrohe iBox reversed hot & cold how to repair Hot &cold installed in reverse hot is plumbed on thre right inlet and cold is installed on left Swap the hoses at the shutoff valves on the wall
Question about Washing Machines
HOT and COLD on then water is room temp when set on HOT. COLD turned off at valve and water is HOT when set on HOT. Checked screens. Mixing valve? or board? Sounds like hot and cold hoses are reversed
...hot and cold water inlet hoses reversed? Is the water heater a distance from the washer? Are you washing many loads in a short amount of time?Is the washer new or just recently installed? Are the hot ...
Question about Whirlpool Washing Machines
...hot water on cold wash or rinse. Turned off the hot water supply during cold cycle and machine stopped filling. Checked that the hoses were connected to right inlet valve and they are. typically hot ...
the water hoses and see if you get just cold water. Post back the results. Ok so I have no water going in when on cold cold. Warm and hot cycles work. Water is turned on. Hoses are not reversed. ?????
1,252 questions posted
Usually answered in minutes!
2,979 Questions
1,498 Questions
680 Questions
658 Questions
476 Questions