Maytag Atlantis MAV6000 Top Load Washer "spin cycle wet" Questions

...Spin cycle MOTOR COUPLER; To test the motor coupler, restart the washer in it's spin cycle,let the machine runs for a minutes and then open the lid and notice if the tub is spinning: if it's spinning ...

spin cycle After spin cycle, clothes are still soaking wet. Drum seems to spin fairly fast, checked that holding lid switch in. Check and choose a longer spin cycle and see if the fault changes. If so

...spin cycle as the same will damage the clothes.... In wollen and acryllic mode the machind is NOT supposed to go into a spin cycle and hence you get wet clothes..... There is Nothing wrong with your ...

clothes wet after rinse cycle clothes wet after spin cycle.Does not spin. lift the washer on its side and see if it has a drive blet that broken for the spin cycle.

...Spin Cycle I have a Maytag Washer Model:MAV2757AWW. I just replaced the Drive belt because the cloths were dripping wet after the spin cycle. The machine spins but not fast enough to decently dry the ...

but not spin out enough. It seems to spin too slow and clothes are too wet at end of cycle If it goes through the complete cycle o.k. except for the slow spin then the motor itself needs to be checked

spin cycle leaves clothes very wet varibly the spin cycle leaves the clothes very wet...not normal for the spin cycle. Belt slipping?? The clothes are wet after spinning When the clothes are wet at ...

...spin cycle my clothes are still very wet at the end of the spin cycle Dear Customer Please perform the following Clothes are too wet after spin cycle: This may be a spin problem or a drain problem ...

...spin cycle I have a Kenmore 90 series washer , the problem Im having is when the wash is finished the clothes are still wet , to wet to put in the dryer . I have to run the spin cycle a couple of ...