...or go into the spin cycle. It makes a loud noise instead From what you're describing I suspect the thrust bearing needs replaced. The thrust bearing is what releases the brakes. You will not be able ...
...runs but will not spin out You either have a bad transmission - worst case - or you have a bad thrust bearing. Remove the belt and rotate the drum pulley CCW. The pulley should push the thrust ...
...machine is not reaching full speed during spin. Check to see if the belt is slipping and that the thrust bearing pulley turns freely. When in the spin cycle the thrust bearing compresses the brake ...
replace thrust bearing maytag PAV2300 Hi,This link is a picture of the thrust bearing and it's order of how it needs to be replaced. Item number you are looking for is 24. I hope this helps
...I HAVE A PAV2300AWW WASHER AND THE IT DOES'T SPIN THE WATER OUT. Check the belt, the pump, and the thrust washer.The thrust washer wears down and won't release the tub. All these symptoms are easily ...
Question about Washing Machines
...it drains in spin cycle, but does not spin. What needs replacement? You will need to replace the thrust bearing. The Instructions are included and there is a video on that same page to show you
Question about Washing Machines
Question if my matag washer model# pav2300aww will not spin out and is suspected to have a bad thrust bearing would the washer still agitate with a bad thrust bearing. Thank u for your time. you may ...
Question about Maytag Washing Machines
washer making rattle noise during wash and spin cycle one site said thrust bearing, can it be anything else? could be rattle noise maybe grinding (not sure) Washer does operate, wash, and ...
...as it is difficult to manually spin the drum during the spin cycle. I have installed a new thrust bearing and pulley kit, but that did not help. With the thin 0.032" thrust washer, the ...
1,252 questions posted
Usually answered in minutes!
2,979 Questions
1,498 Questions
680 Questions
658 Questions
476 Questions