Question about Electrolux Washing Machines
...using the hot water solenoid which will activate the hot water solenoid that is now connected to the cold water tap if that works get a new water control solenoid and replace the cold water ...
...water solenoid has failed, to get the washer going, for use (the result will be cold water wash only) open the rear panel locate the 2 solenoid valves, trace the water lines in to the first !+~3inch ...
...water solenoid valve again, or give it a little tap, sometimes they get stuck, when you remove plug, if you had a timer problem, water would stop, your water solenoid valve have to be faulty, if you ...
Question about Maytag Washing Machines
...color). Possibly the Cold water solenoid failed or the wire feeding the solenoid fell off. Google Washing Machine Solenoid and you can see what it looks like. The Water hoses literally attach to ...
...water solenoid. or hot water is still flowing to your cold water line. if the cold water solenoid is the problem, then there should be no water at all going to the tub. try to experiment, try to ...
...water solenoid valve will have two electrical wires connected to it. Interchange the hot water solenoid wires with the cold water solenoid connection. Connect the water supply hoses hot to hot and ...
...water solenoid and the other connector pair provides the 120volt AC to the Cold water solenoid. (3) Remove the push on or pull off quick disconnect electrical connector to one of the water inlet ...
water solenoid valve inside rear of case if not fix replace cold water solenoid. cold water solenoid valve fails more often than hot, is used on every cycle so bnurns out first. unplug washer and turn
...wated. If not check for power at the 2 wires that go to this solenoid, if you gout power then you need to replace your cold water solenoid. I hope this helps. Don't forget to rate my answer,
to prove that the Cold water Solenoid is not working. Could be electrical from program timer or The Needle or Diaphragm inside the Valve section of the Solenoid. Take apart the solenoid & clean it
1,252 questions posted
Usually answered in minutes!
2,979 Questions
1,498 Questions
680 Questions
658 Questions
476 Questions