water is on, washer just won39;t start to fill. Any ideas? I know you don39;t want to hear this, but either you did something to the hose filter or you didn39;t get it plugged back in correctly.
Question about Maytag Washing Machines
...water won39;t stop filling with water even when power is off. fills with water then over flows water fill valve have a particle of trash or deposit from water.replace water valve and problem
...water out several times and tried different cycles but the same thing is happening. I only had the machine installed today 11/10/12. Can anybody help please? It39;s driving me insane! Thanks see ...
...timer.The door latch switch is working and still it won39;t start. my hoover washing machine do not stop they show 1 min left . i was try serval time the happend is same and inside few water as ...
...not replace it. The only way it can get water is through the valve. If the valve is good and won39;t shut off then the power is not shuting off in the machine ,possibile switch bad. Hope this
...won't fill with hot or cold water This can be due to a clogging of the inlet valve as the water flow is restricted. You can remove the water line to the washer and check the flow , then check ...
...water it finds there, it won39;t go any further. Same on a spin, if after a set time the water hasn39;t emptied the empty cycle will stop but the spine cycle wont start because there is still ...
...won39;t manually go on to drain or spin. HELP please, my washing39;s been stuck in there for 3 days!! Thanks. I suspect that the logic board has developed a fault and probably needs replacing. ...
won39;t advance. Then you need to replace the timer. It may be a cold-water supply problem, if the washing machine fills with water, agitates, drains, and spins, but then doesn39;t fill with rinse
1,252 questions posted
Usually answered in minutes!
2,979 Questions
1,498 Questions
680 Questions
658 Questions
476 Questions