...I don't think you need the motor cover.When you receive the parts, you can contact me at catriver@npgcable.com. If you need any help putting them in I will be happy to assist you.
...impeller restricting the flow. The pump comes off easy. Two clips and two clamps. Check the photo, Catriver..post back. catriver, ordered part came in today. put it in, works like new. can't thank ...
...on spin cycle?? blaker, check the lid switch, no spin, no drain, usually a broken lid switch...Catriver...post
code errors fixed Thank you catriver for your help! The hose was pinched a little. It's all fixed now. thanks again! off the unsolved list!!
removing tub Which way do you turn the spanner nut to remove it. cw or ccw? counter clockwise. Catriver
kenmore 22422 not draining or spining Its filled with water and will wash but will not drain or spin Misti, usually no spin, no drain is a broken lid switch. part #3949238. See if the switch is busted
...Yellow bars, one on each side, shipping brackets, remove them or the washer will shake violently.
...will not open I have the same problem as the one described below by Artweavaly. As suggested by catriver's response (second paragraph below), I went into test mode and did a self diag. After a ...
...the filter out. Clean out all the stuff and put it back in. See if the washer comes back to life...Catriver..post back Also, please check for any stucked clothe inside a washer'ssidfe( they are ...
Same Problem as Carmal Message for Catriver: Can you tell me the part number for a new water inlet valve for my Kenmore HE3? Model number is 110.44832.200. Thanks, FigGirl I believe you already have ...
655 questions posted
Usually answered in minutes!
2,979 Questions
1,498 Questions
947 Questions
680 Questions
658 Questions