Maytag SAV5701A Top Load Washer "drum locking kit" Questions

...drum case. Single belt under machine appears to be in good condition. Agitator teeth (both sides) intact. Using locking pliers, cannot move center column. Transmission won't wiggle when handled from ...

...drum, door will not open. Do I lay machine on its back and go up from bottom or take back off or take top off? or something else. take top off and see if you can feel for the door peg sticking thro ...

kit (which comes with extra washers) If you have too many washers then the tub will not lock down for wash mode and the clothes will get all knotted up. If you have too few washers then the brake will

...drum does not spin...what is my problem? timer? circuit board? door lock sw? please help... Could be just about anything. It's all designed to prevent it from spinning if there is a problem. If the ...

...drum/motor/pump assembly move back and forth a great deal when the spin cycle begins.... Any thoughts? Thanks!!! Travioso, there was two service flashes out on this model concerning the seal and ...

...spin. Their are 2 marks on the pulley, the drum should release in between the two points. if not then the thrust bearing kit needs to be replaced. I have a pictorial of that and a service manual ...

...drum bearing seal and it has gone out and ruined the bearings,you would need a lip seal kit and appropriate bearings for that particular unit,i do a lot of maytag front loads and it can take anywhere ...

drum on my Kenmore front loader for moving. I have the screw kit but they dont seem to ''catch'' to anything when inserted. They have the orange collar around the screw....I took them out when I moved

drum. Any info would be helpful, Thanks Luie you have a locked rotor and need a need motor and motor control maytag used to sell these replacements as a kit but you may be able to get away with just a

...locking nuts up tight to the underside of the machine so that they will not move. Ideally the rear feet should also be locked. If this has not cured the problem it is possible that the internal drum ...