Maytag SAV5701A Top Load Washer "stop burning feet" Questions

white smoke coming from the machine, it was in the middle of the extended cycle. stopped machine and unplugged. Smells as though something burned. White smoke coming from the machine, it was in the ...

...burning occurred) during a spin cycle. I replaced the belt and also spun the drum and agitator to see if something was 'locked up'. Both seemed to move freely. After changing the belt, the machine ...

burning or hot. The washer will then stop and but continue to buzz until I turn off the machine. Is it the motor or the drive. If so, how do I check each one to see if it is working properly or not? I

burning or hot. The washer will then stop and but continue to buzz until I turn off the machine. Is it the motor or the drive. If so, how do I check each one to see if it is working properly or not? I

...Here is the background. About 5-6 months ago I started noticing a squeaking sound once the washer stopped after the spin cycle. I was informed this was the braking system, but should not be of any ...

ran through cycles fine untill it got to spin cycle then stopped and started humming and did not drain all water out The pump has either blocked or failed. The humming noise strongly suggests a ...

feet of the washer to gain better access to the screws. Once the screws are removed the panel should drop down, and then pull off. If the panel becomes stuck, a slight tap on either side will dislodge

burning smell because the motor was working too hard to turn the coupler. I repeated my work and seated the coupler halves on each shaft with a hammer. The machine now works well. Here is an alternate