Galaxy Radios DX-44V 40-Channels Base CB Radio "channel reciever working" Questions

...i know of, recieves but is weird soundin, like people are underwater...recieves on PA, or CB..and channel 19 comes thru on all channels..??? could it be just the final? Swr is set...2 other radios ...

My cb transmits with a very weak signal and won't recieve anything. The weather band recieves with no problems. I couldn't even pick up a signal on my SWR meter but a friend of mine tested it on his ...

realistic trc 443 cb quits transmitting and recieving hi,i have a problem,sometimes my cb quits transmitting and recieving,it does not shut down,it makes a beeping noise when it happens.it might work ...

cobra 25 only transmit and recieve on ch 1 cobra 25 will only transmit and recieve on ch 1. the body was dented in where IC3 is located causeing it to short out, after that the ch display and slecter ...

my cb cobra 29 ltd problem is channel 1 is ok but channel 2 not receive Did you have someone get on channel 2 to see??? Maybe channel 2 was quiet and channel one had better receive or noise.. You ...

dx-88 HL freq. counter on 26 MHZ no matter where the channel selector or band selector is in. will not recieve or transmit on any channel. You'll need to take it to a repair shop. Because it transmits

on channel one would mean antenna needs to be shorter and the opposite for channel one. A balanced reading or slightly lower reading in the midband channels would indicate antenna working near optimum

need to tune and peak my midland 1000 cb it has a lot of static in the background and a high pitch squel in the background too. and my recieve is very poor. sounds like a problem to me . I have one ...

200 gtl dx has no output but still recieves,who works on these Known bugaboo with these radios, weak design in the RF amp. Needs to go to a good shop. Email me...... [email protected]

i have a 44 v everything works but no modulation i have a 44 v it recieves great rf power works rodger beep works got a strong dead key on another radio new mic and have replaced several parts in it ...