Dell Photo 964 All-In-One InkJet Printer "stopping outgoing faxes" Questions

...this can stop the fax from working. If so, resolve this and try again. Do you need to dial a number to get an outside line? If so this needs to be entered before the fax number on outgoing

...faxes (incoming or outgoing). Press Menu then select Fax (up and down arrows). Press Set, and use the navigation keys until Setup Reports or Report Settings appears. Then press Set and use the ...

...outgoing faxes. ? Choose whether to scan the entire document before dialing the number. ? Choose whether to use error correction. ? Select when to print a fax usage report. ? Select when to print a ...

Fax tries to receive randomly during phone calls Our 1600n shares a line with our home phone, therefore, it is set to TAD to work with our answering machine. The problem is that it randomly comes "on"

cannot scan my printer will not scan keep getting error message because an ink cartridge is empty. However, since the ink is too expensive and dry very quickly, I just want to keep it as a scanner and

tried to fax a 2 page letter getting on the mach did it in blk /colorand still disconnect get a print out report NG: POOR LINE CONDITION/OUT OF MEMORY how do i fix this Have a look at these solutions ...

fax machine not sending out fax, transmition report reads "out of memory" and "poor line condition" This problem could be Phone line problem, or hardware failure or receiver's (the machine of the ...

NG: Poor Line Condition / Out Of Memory Brother MFC8860DN Fax won't send or receive. NG: Poor Line Condition / Out Of Memory This problem could be Phone line problem, or hardware failure or receiver's

...need to do is locate the queue of outgoing faxes and clear them out. In order to do this, you must go to: Menu, Fax and Remaining Jobs. It is here where you can identify the outgoing fax and

Outgoing faxes have large vertical black line on receivers end. I have replaced toner and drum. Incoming faxes are fine. Stop! Does not need any parts... If you do not use the automatic document ...