lights flash and it will give a printout or just press the start a couple times for a printout that also gives the print count. Hi and welcome to Fixya, How to fing the page count you will need to use
Question about Dell Office Equipment & Supplies
...server. Please retry a little later." If I try to click the "Printer Diagnosis link in Dr. Printer, it raises errors in the Dr. Printer window "Failed to check printer status." Also get "Internal ...
Question about Dell Office Equipment & Supplies
server" I have uninstalled/reinstalled the software 3 times, went on HP website download updates, checked to see if Microsoft windows can help me. Nothing has worked you can print out a status page by
...server If you can print an engine test page (page of lines) and there is no display or any LED status lights, verify that your control panel is properly plugged into the formatter board and the ...
Question about Dell Office Equipment & Supplies
...server. Whilst the printer is turned off, press and hold the GO button as you plug the printer on to the socket. Notice that all lights on the printer will turn on as well. Continue pressing the go ...
...lights (where the network cable plugs into the machine) are green (one solid, one blinking) It sounds like the print driver is not playing nice. Try removing the printer and uninstalling the driver ...
...Server Properties window to return Printers and Faxes window. 11. Check that the USB cable is properly connected at both ends. 12. Turn the printer ON. 13. Wait until printer has ready light or green ...
Question about Dell Office Equipment & Supplies
...Server (EWS).' If the status entry reads anything else, continue with the next step. Press the Setup button on the product control panel, select Network , and then select Wireless Setup Wizard . ...
...Server (EWS).' If the status entry reads anything else, continue with the next step.Press the Setup button ( ) on the product control panel, select Network , and then ...
Question about Dell Office Equipment & Supplies
...Yellow Status LED lights. When the status LED lights, release the Go button. When all the LED's light, the printer will start warming up. The print server has now been reset to its factory
180 questions posted
Usually answered in minutes!
995 Questions
574 Questions
608 Questions
501 Questions
509 Questions