recieving error code 20 07 when trying to fax something what does this mean A 20.07 error code is a memory error on HP laserjet printers.
...07 to rest drum sub code 09 to reset print count and sub code 11 to reset developer. Hope this helps press:# --> interrupt --> clear -->interruptreset service code: 20 --> start --> 1 ...
Question about Sharp Office Equipment & Supplies
20 - 01 Maintenance counter clear 24 -01 Jam total counter clear 02 Trouble memory clear 04 SPF counter clear 06 Paper feed counter clear 07 Drum counter clear 08 Copy counter clear 09 Printer counter
Question about Brother Office Equipment & Supplies
...20 07 I found in my manual for out of memory fix was to shut off fax memory which stores a copy of each fax sent...don't get that msg anymore but didn't solve my problem.....phone company contacted ...
...07 post: Apparently, the lower voltages are correct for the power supply when not connected to the printer. Removal and reinstallation of the print head resulted in the printer powering up. I had to ...
Question about Konica Minolta Office Equipment & Supplies
...20 Whwn M20 up drive 2 is ON an M20 error detection .The copier stops immeditely. F 18-21 PS 21 tray paper limit 2 which has been OFF is not turned ON whitin 10 sec.of upward movement.At this time ...
Question about Sharp Office Equipment & Supplies
...07. The toner cartridge is empty or defective. 08. The laser scanner door does not open properly. 09. Remove and reseat the toner cartridge. 10. Check the laser scanner shutter door for proper ...
...20] [START] [01] [START]?000??000? will flash on the display. * Reset the drum life counter: * Input [24] [START] [07] [START] "000"000" will flash on the display * Reset developer life counter: * ...
...20/Oct/2010:15:22:07 +0300] [Job 14] Job stopped due to filter errors. Please get the correct driver here : www.printcountry.com/drivers.asp www.opendrivers.com/.../printers-free-driver-download.html ...
...20/07 12:22 PM) reply + / - Anybody know the error code "49. FF95 Service Error" We can't get around this... Firmware Error 49 by Stephen (edited 3/20/07 12:29 PM) reply + / - It could be a bad job. ...
1,371 questions posted
Usually answered in minutes!
603 Questions
557 Questions
331 Questions
354 Questions
183 Questions