Question about Sharp Office Equipment & Supplies
shake the toner Cartridge and put it back Shaking the cartridge will free up extra toner when it is almost empty. That will not help fix after images. Mine has the same problem. I just tried vacuuming
...drum. Take the black cartridge out of the printer. Shake it, reinstall it. Power cycle the printer. If the error comes back, remove the black image drum and reseat it. The image drums(one for each ...
drum unit Remove the image unit that the operating screen indicates then install the new one don't for get to pull the protective sheet once the image unit is installed Also en sure to shake the image
...need any new toner. Is this the drum? Do I need to replace the drum or a different part? please shake well to your toners.then verify your toner. if any scratch is appear then please change the
...drum had a hell of time trying to turn always store image units laying down always before placing them inside the machine shake the image unit to spread the developer along the image unit, if this ...
...shake the cartridge well and put it back & check, replace with another cartridge, check half test page if no print on paper check on image on cartridge drum( while printings approx half page open ...
Question about Sharp Office Equipment & Supplies
...shake each image unit along its axis you want to have the developer and toner inside each image units to be evenly spread along the axis of the image units so that the motor that turn the drum and ...
Question about Sharp Office Equipment & Supplies
...shake each image unit along its axis you want to have the developer and toner inside each image units to be evenly spread along the axis of the image units so that the motor that turn the drum and ...
...units and shake each one along its axis to ensure developer and toner are equally along the image unit. then re-install if not have bad PC drum motor or worse the main board is
Question about OKI Office Equipment & Supplies
...drum or fuse wire unit. If you take the toner cartridge out and gent shake it side to side this will redistribute the toner in the cartridge. Put it back in and do a test print to see if that fixed ...
1,371 questions posted
Usually answered in minutes!
603 Questions
557 Questions
331 Questions
354 Questions
183 Questions
