Sony BRAVIA KDL-V32XBR1 32 in. LCD HDTV "blinking red light 6" Questions

...blinking lights. Both had the same fail rate of 21 I guess the number of times it failed since last working. Will 6 and 13 always show the same fail rates, if the inverter board is bad? The TV Red ...

...red light flashing 3 times, wont switch on t.v suddenly went off, red light comes on next to standby light and blinks 3 times. Wont switch on after i press standby button. Shutdown with a 3x blink ...

red LED. I replaced the main P/S and issue remains the same. Sony won't even help. Bus clock and/or data lines low at power on. 6 blinks of standby light denotes this. Actually, it should be a

...thing in a sequence of three, then shuts off with red light blinking six times, pausing and repeating. Sounds like a power board reset switch gone bad. Have the power board replaced.Good Luck Ed ...

...mode My Sony BRAVIA KDL-46W3000 goes to stand-by Mode, a red blinking light goes on in a sequence of 6 blinks, What could be the problem? I don't have a solution, but I have the exact same ...

...red light flashing. can prob fix myself if I can find exactly what part to buy & swap. These flashes are called blinking codes, and are fault indications. If you wish to get more details to these ...

...red blinks I was getting 13 blinks. I changed the back light inverter and now I'm getting 6 blinks. Any ideas? a 6 blink is the power supply board that connects to the inverter board. check ...

...blinking red standby lights, 2 sec pause, but no TV picture Hi, shutdown with a 3x blink pattern occurs if the 12v from the power supply (GF1 or GF2 depending on model) is lost at CN6153/pin 6 to the ...

...blinking red light flashes 6 times. I dusted tha back of the tv and tried it again with no luck. 6 flashes = Backlight Possible causes. Main board, Power supply board, or Inverter board. See link ...

...red led standby light mean 6 times flashing when turn on goes to standby flashing 6 times then pause then 6 again. These blinks [flashes] are fault indication (Error Codes). From the number of blinks ...