Sharp Aquos LC-32D40U Television "tv clicks turned picture" Questions

...TV picture goes off few seconds after power on. When I turn on the TV picture comes on and than screen turns black but the sound stays on. After power up I hear a click like a relay switching on and ...

tv has sound but no picture watching cable tv, all channels have audio but not the program, just the same fixed-blinking picture. Tried shutting off tv and turning back on - is not working still go to

...turned green followed by another click. At this point the power light started flashing red and of course no picture ever came up, I called sharp they were hopeless and still done nothing about it, I ...

tv on and off until it works? My 3 year old Sharp LC-40C32U would start up fine but within a minute would go dark (audio continued fine). For a while I could turn the set off and on again and it would

picture. Once the TV has been on for awhile, start up even a couple hours later is pretty normal, I think. Shortly after I bought the TV, I spoke with the salesman at Video Only that sold the TV to me

picture, and then hear a click and light flashes green. First turn on,do the power LED light stable?Few sec.Power LED and LED OPC flashes?This very common on Sharp tv,tries power off/on at 4 or 5 each

TV on, the green power light comes on, then it turns red and finally begins to flash. There is no picture at all. I can get into the service codes via holding Volume down and input while clicking main

...tv is good right?Sometime POWER light and OPC light flashes?Push the power button on/off couples times will work, picture will come on.If keep trying off/on couples time after POWER and OPC ...

...minutes of a blank screen it turns itself off and goes back to the red light. Plasma and LCD TV sets are prone to having capacitors in the power supply section fail. This is the most likely ...

clicks to the right if the screen is dark) and one up to RESET; d) hit ENTER and follow the prompts. This puts the set in it's factory configuration so you will have to rescan for channels. Worked for