back of the swivel stand. If so, remove it and you will find four to eight phillips screws. Take them out and the stand should come free. If there is no plastic cover, then there should be some screws
...remove back cover of viewsonic VT2430 I have a viewsonic VT2430, how do I remove the back cover, I already removed all screws on the back, no other screws are visible, I removed big and small screws, ...
remove back cover from viewsonic n2752 removing back cover Check this link.
...remove the back cover, then remove the metal cover that covered the power supply. Watch tv w/o cover, it won't shut down again. Try it and post here if it works. I have the same model - Removing the ...
...back casing of the television. It seems to be held in place with some latches. How do you remove the cover without damaging the TV. Take out all screws around the outer edge and the smaller screws ...
the front panel on a lns5296d replacing front panel on a 52 inch tv you first have to remove back cover then remove boards and board brackets then remove LCD panel and that leaves just the front cover
...cover. is this for the remote? This is usually on the back and you can either press and slide, lift the cover by moving the clip up or by removing one or two screws from the back to remove the
how do I remove the cover off my N2752w remove cover just unscrew the back cover then lift up the cover that's it..
Question about Philips Televison & Video
remove the back cover on Magnavox 32MD251D/37 I have removed all the screws around the back cover and it does not come off. Anything else i need to do to take the cover off? These are snapped on tight
Question about Sceptre Televison & Video
back cover of Sceptre of X30SV Naga III I'm trying to open the back cover of the TV and I couldn't frigure out how. I have already removed all the screws, but still the cover won't move from its place
49 questions posted
Usually answered in minutes!
405 Questions
364 Questions
299 Questions
263 Questions
243 Questions