Sony BRAVIA KDL-46S2000 46 in. LCD HDTV "tv blinking 6" Questions

...6 times TV won't turn on for more than half a second. Shows Sony logo briefly, two times in a row, and then TV shuts itself off. The standby light blinks 6 times too. i have a Sony Bravia LCD ...

...denotes this. Actually, it should be a motherboard problem. Your TV need a thorough checkup before confirmation. If you wish to get more details about the blinking codes to Sony TVs, check this

...TV worked for about an hour, and then died again. Same 'standby' 6 blinking light error code appears. Granted, this inverter board may also be bad, but based on that screenshot, could something else ...

...TV to power up with the backlight. The Sony diagnostic screen show errors for 6 blinking lights and 13 blinking lights. Both had the same fail rate of 21 I guess the number of times it failed since ...

...tv shut itself off. Then a blinking red light flashes 6 times. I dusted tha back of the tv and tried it again with no luck. 6 flashes = Backlight Possible causes. Main board, Power supply board, or ...

...TV. Count the blinks occur at one time switch ON, carefully. Do it once again, and make sure about the number of blinks. If the flashes are continious, non-stop, the main system control IC should be ...

...blinking on tv front? What is model number of your tv? How many times standby light blinking after 3 seconds long pause? Let me know to find out possible cause of problem. I have same problem. Mine ...

TV makes a humm when turned on for a split second then turns off and blinks 13 times. Not 6 then 7. Not 4 then 9. Thirteen perfect blinks stop. Then 13 blinks again. It's a power supply related issue.

...TV since a few minutes in normal conditions) Then, the front red LED starts blinking 6 times, stops, and so on. I did some research on the web and it seems to be a backlight issue. I also found the ...

...blinking 6 times but doesn't turn on These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit ...