HP PL4260N 42 in. Plasma HDTV "sus" Questions

...is telling me it's not an cable issue, but the problem is my TV. Please advise. Replace the Y Sustainer board will fix the problem. Y sus boad is the most common cause of this complaint;

...The first thing you should look into is the Z-SUS board, the one situated on the right side viewed from the rear. This board develops a high ...

...the power supply pcb, all main voltages Va, Vs within spec. Have audio. One big cap on the Y sus is bubbled. Your thoughts appreaciated. Aaron Aaron, If you have a bubbled on you r Y sus board ...

x-sus board replaced year later same pop of death My aunt had the pop of death last year, tech look and replaced the X-SUS BOARD. Worked until now, how do I test the x-sus and what else should I test?

...the short yellow harness which connects the upper to the lower sdr. Other wise you will smoke the y-SUS. Mine started to smoke the y-sus when i restored power after removing the upper sdr from the ...

...failure in many PLASMAs. One of the boards in the TV blew. Most likely It is going to be the Y-sus but could have also taken out the Z-sus(sometimes called the X-sus) and the Y-drives. These ...

42" plasma won't stay on 42" lg flat panel had capacitor blow on Y SUS, replaced the board now I turn the tv on power light comes on for 5 sec then shuts itself off What is causing this? I would ...

60PV250 NO PICTURE SOUND OK Y-sus problems or no power to Y-sus check the power supply of the Y-sus and if its ok replace the Ysus board if its not ok replace PSU

i don't know which is right x-sus & y-sus or power supply 12/22 codes i don't know which is right x-sus & y-sus or power supply 12/22 codes If they are on left and right sides look