Akai LCT2715 27 in. LCD Television "removing flat screen tv" Questions

...ON A 42" FLAT SCREEN HOW DO YOU REMOVE THE BASE ON A 42" FLAT SCREEN TV, SO I CAN MOUNT IT ON THE WALL you will have about 4 -7 screws on rear of tv ... normally there a bit bigger than rest

how do you remove the stand from a Seiki flat screen tv I am trying to remove the base or stand from my Seiki 32" flat screen tv If you buy one manufactured July 2012 there are 6 screws in the back! :

removing the tv stand from tv How do you remove the tv stand from the hct flat screen tv?? There are 4 screws on the back of the tv 2 on each side of the plug remove these and the stand will slide ...

...FLAT SCREEN TV help before husband destroys new televison he is trying to mount our 37'' LN37A550 flat screen and he cant figure out how the remove mount and stand To remove the base stand, place the ...

...flat screen TV how to remove the base? Lay the tv screen facing down on something soft like your sette or bed so the base is hanging over the edge. At the back you should see screws on the base, if ...

...are about 3 inches apart in a square formation, lay the tv screen first on a flat cushioned surface to prevent damage to the screen then remove these screws and pull out the stand. hope this

...on bed face down and look at the stand and locate and remove any and all screws holding stand to the flat screen set. Then after mounting the wall plate per instructions mount the tv to wall

...Flat Screen 26" TV Hi,I have a flat screen 26" Polaroid TV that is almost 2 years old. I played a DVD on it and it worked fine. When I went to turnn on the TV again there was a large, black rectangle ...

...on a HD TV I use clean Dr. from Wal mart it has no abrasive fluids and is for flat screen tv's and lap tops cost 3 bucks for a 9 oz spray bottle and with paper towels it leaves the screen streak

flat screen tv There are 4 holes on the back of the TV just above where the neck of the base is. Lay the TV face down on something soft that will support the weight and remove those 4 screws. pull the